Qingdao Lian Ya Boat Co., Ltd.
Shandong, China
Performans
5.0/5
Çok memnunum1 değerlendirmeler
  • ≤5h
    Ortalama yanıt süresi
  • 100.0%
    Zamanında teslimat oranı
  • -
    {0} sipariş
Tasarım Kaynaklı Özelleştirme
Ham madde izlenebilirliği tanımlama
Nihai Ürün Denetimi
Tüm doğrulanmış olanaklara ({capacitiesNum}) göz atın
Profil
Raporu indirin
by Intertek
Genel Bakış
Şirket tescil tarihi2007-03-09
Zemin alanı (㎡)6600
Kabul edilen dillerEnglish
İhracat yapılan yıllar17
Sektördeki yıllar17
Sertifika
Üretim özellikleri
Üretim hatları2
Toplam yıllık çıktı (birim)3900
Üretim makineleri10
Kalite kontrol
Ham maddelerin Ürün Destek izlenebilirliğiYes
Ürün denetim yöntemiInspection of all products
Tüm üretim hatlarında yürütülen kalite kontrolYes
QA/QC müfettişleri3
Ticaret geçmişi
Ana pazarlarWestern Europe(16%), Oceania(12%), Northern Europe(12%)
Tedarik zinciri ortakları45
Ana müşteri türleriRetailer
R&D olanakları
Özelleştirme seçeneklerisample processing, graphic processing, customized on demand
Geçen yıl piyasaya sürülen yeni ürünler80
R&D mühendisleri2
R&D mühendisi eğitim düzeyleri1 postGraduate, 1 technicalSchool
Şirket Değerlendirmeleri (1)
5.0 /5
Çok memnunum
  • Tedarikçi Hizmeti
    5.0
  • Zamanında Sevkiyat
    5.0
  • Ürün Kalitesi
    5.0
The boat itself is of very good quality and there were some very thoughtful designs included in the boat plan. One thing that stands out is a front keel reinforced with a steel guard that prevents damage when beached or in shallow water. Secondly, the seat padding is very comfortable because it is not too thin and provides much cushion in rough waters. Another thing that I was pleasantly surprised with was that the manufacturer provided a small batch of gel coats in both colors of the boat to use as a repair kit in case of minor scratches and damage. The cabling was laid out perfectly and there was even a cable conduit already built in from stern to aft for any electrical additions desired. I would say the only thing that needs a redesign is the placement and size of the drain holes in the storage compartments. For instance, the anchor well or front well has a drain hole that isn't at the floor level of the compartment and water collects there and is a little challenging to dry out.
Tüm değerlendirmelere göz at
Video ipuçları
00:46
Kaburga tekne 5.2 metre HYPALON tekne
00:43
Liya 19ft 22ft 25ft derin V alt fiberglas balıkçılık tekne ile gölgelik
00:45
Liya Panga tekne
00:32
Liya kaburga 620, rijit gövde şişme bot
00:09
Liya rijit gövde şişme bot
00:39
Liya Panga tekne SW760
00:10
Liya 25 ayak panga tekne, fiberglas balıkçılık tekne,
00:15
Liya fabrika
Daha fazlasını görüntüleyin